Re: Re-using case stickers
I've never gotten the glue to adhere to a new case. Have used either rubber cement or 3M spray glue, depending on what I have sitting around.
My method for removal has usually been a sharp knife lifting one corner than slowly peeling the sticker off. Your idea of the hair dryer is probably better.
Re: Re-using case stickers
I have successfully done this. I just did a good job peeling the stickers and then spray adhesive worked fine.
Re: Re-using case stickers
or get a new case to sell the mandolin with and keep your old case with the stickers!
idk. maybe that's too obvious to be clever. If so, I'll shut up!
Re: Re-using case stickers
Quote:
Originally Posted by
Marc Katz
or get a new case to sell the mandolin with and keep your old case with the stickers!
idk. maybe that's too obvious to be clever. If so, I'll shut up!
No, I've definitely considered that. I have an extra gig bag. I sewed padding and cushions for the case, yadda yadda, and it does have "character". But in the end, it's a pretty crappy case.
I have spray adhesive, so I might go that way as well.
Re: Re-using case stickers
If you have enough room put it in a freezer, it usually loosen glue quite nicely.
Re: Re-using case stickers
Just a note for anyone reading this thread in the future, please remove the instrument from the case before heating it or freezing it. Thank you and carry on.
1 Attachment(s)
Re: Re-using case stickers
Obviously, stating the obvious, obviously. :grin: But better safe than sorry. ;)
BTW, when my old van died, I was saddened about the loss of my Red Knuckles And The Trailblazers bumper sticker. :( I didn't know about any of these methods, but do not/did not/never will have a hair dryer. And it wouldn't have fit into an oven or a freezer, either. :whistling:
Attachment 207689
Re: Re-using case stickers
I wouldn't have a hair dryer either, except my daughter left it behind when she moved away. I mainly use it to remove labels from Amazon padded envelopes to reduce weight for re-use and suchlike.
Nice bumper sticker, btw.
Re: Re-using case stickers
Hairdryer will soften the glue and it might even stay on the sticker. If it doesn't stick, you could place doublesided tape on the glue and cut the edges of the sticker free. Voilá.
Careful with the hairdryer. As soon as the sticker is free, it will crumble very easily under heat.
Re: Re-using case stickers
My stickers have nowhere to go since I started using gig bags.
Re: Re-using case stickers
Quote:
Originally Posted by
Bren
My stickers have nowhere to go since I started using gig bags.
When young, I bought patches from different towns and my mother would sew them onto my brown cotton guitarbag.:)
Re: Re-using case stickers
Quote:
Originally Posted by
Sue Rieter
Nice bumper sticker, btw.
Thanks. Ain't it a peach? I found the photo at the Hot Rize fb page and used it because they aren't available at their merch page. In fact, the merch page is shut down. Sigh ... :( I hope I still have one in my collection of stickers in deep storage. I've seldom if ever put stickers on a case. Just don't like the look. And you see what happens when put on a vehicle - which, by the way, that was not on the bumper, but somewhat askew halfway up the left rear corner by a dent. (Yep, like a knucklehead. ;) ) So they collect dust - not really, they're in a big manila envelope ... somewhere ... :whistling: I do have thst T-shirt, though. And also. a Slade black-on-black T-shirt. That is truly hilarious - and not just a black T-shirt, but with a design on it - in black. :grin: Perhaps best of all, a RK&TTB fly swatter, autographed by all four of them. Slade's signature took up one whole side of the handle - natually. ;) They were indeed brilliant marketers.
We now return you to your regularly scheduled programming, already in progress ... :whistling:
Re: Re-using case stickers
Quote:
Originally Posted by
MikeEdgerton
Just a note for anyone reading this thread in the future, please remove the instrument from the case before heating it or freezing it. Thank you and carry on.
thanks Mike.
Re: Re-using case stickers
Quote:
Originally Posted by
MikeEdgerton
Just a note for anyone reading this thread in the future, please remove the instrument from the case before heating it or freezing it. Thank you and carry on.
Thanks Mike, I thought that was a given, but better safe than sorry.
1 Attachment(s)
Re: Re-using case stickers
Quote:
Originally Posted by
journeybear
Obviously, stating the obvious, obviously. :grin: But better safe than sorry. ;)
BTW, when my old van died, I was saddened about the loss of my Red Knuckles And The Trailblazers bumper sticker. :( I didn't know about any of these methods, but do not/did not/never will have a hair dryer. And it wouldn't have fit into an oven or a freezer, either. :whistling:
Attachment 207689
Hey, I'm a knucklehead too! :) My original sticker had simply worn away. I was happy to pick up my latest "I'm a Knucklehead" sticker when I last saw Hot Rize (farewell tour).
Re: Re-using case stickers
As an old fart who probably will leave his wife and kids with way too much nostalgic junk, I have since decided to take photos of my memory-laden ephemera and store it on my hard drive. At some point we hoarders will have to relinquish this stuff. See George Carlin for more details. :)
Re: Re-using case stickers
I bought one of the Crossrock fiberglass cases a while back and my Kelly A5 lives in it now; really like the case, and love the mandolin. Anyway, I’ve still got the old, well stickered, Golden Gate case. I always just figured I’d hang onto it until I realized I really never was going to use it again, then give it away. I almost actually did that a while back here when a forum member was looking for a case just to store his mando in at home, but it turned out he had an F style and the GG is an A. Phewww! Now I may be able to salvage a few of my old sticker favs!!
Re: Re-using case stickers
So I just finished my sticker transfer. Some of the stickers came right off, glue intact - apparently hadn't bonded too well to the case surface. They were immediately re-usable. Next I tried the freezer. Although one of my favorite (holographic!) stickers did release easily with this method (glue intact), I'd be careful of weather doing this again. Today is a rainy, warm and humid day, and I immediately got so much condensation on and in the case that I'm leery of putting the mandolin back in there until it's fully dried out (and that might take awhile). Lastly I tried the hair dryer (lowest setting) on a sticker that the freezer didn't budge, and that worked. So far I haven't had to put new glue on any of them.
I think the best method might depend on the sticker material and the case material. As I mentioned, the old case was cardboard/chipboard, and the receiving case is a newer hard case with a plastic-y surface.
Re: Re-using case stickers
Adhesive solvents to get them off Decoupage with clear acrylic glazing to stick them back on?
4 Attachment(s)
Re: Re-using case stickers
These stickers from Elderly make me wish I had a fiberglass case to put them on.
Attachment 208201 Attachment 208202
Attachment 208203 Attachment 208204
1 Attachment(s)
Re: Re-using case stickers
This one is my favorite case bumper sticker. It was given to me a long time ago by a friend who was in this band. I’ll definitely try these techniques if I ever have to part with the case.Attachment 208275