Thanks! Evo Gold frets.
Thanks! Evo Gold frets.
John Hamlett
www.hamlettinstruments.com
Another trashcan rescue, sort of. All plywood (save the neck, it appears) MIJ "Winston" from what, the 60s?
Quick question is whether these little plastic rings, which take the place of actual ferrules, should be tacked down with a dab of fish glue or similar. Just a vote. I'm guessing the originals were not glued, though it looked like one or two might have been. (Hard to tell from the decades of tar build-up that was all over this thing since its life was that of a wall hanging in a smoker's home.)
FWIW, the back had popped off, and a friend had first decided to toss it, but had second thoughts and pulled it from the trash. Some time (years, perhaps - I didn't ask), after it had spent its time backless with the strings under tension, we were having a chat that turned mandos, and I said I could probably at least make it suitable as a wall-hanging, again. And, here we are...
p.s. (edit) Ha. Well, "Never mind..." After picking the thing up to look at something and having them fall off and roll to dark corners, *twice*, they're tacked down for now. I figured one more time and one of them would go somewhere I couldn't get to, and then I'd spend too much time kicking myself. I suspect they won't stay that way forever, maybe not past the first string-up, but leaving them loose wasn't working
Last edited by keith.rogers; Apr-16-2022 at 11:23am.
2018 Kentucky KM-950, 2017 Ellis A5 Deluxe
Holy hot plate Batman! Never have seen a bending rig like that but apparently it gets the job done.
Charley
A bunch of stuff with four strings
John, that is some seriously good inlay work.
John - Really like the inlay, especially the peg head; reminds me of the pine cone mandolin inlay, which is an all time favorite. i wonder if the "corn neck" owner plays an E9 steel also.
The inlay represents the 3 sisters. Apparently several native American tribes considered corn, beans and squash to be gifts from their gods, and grew the three crops together. The idea for the theme came from the future owners, the design was done by his hired artist, I did the work of cutting and inlaying the design after working with the artist to help adapt it for the fingerboard.
John Hamlett
www.hamlettinstruments.com
The next step in the mandolin quartet project - the side assemblies for the two mandolins, mandola and mandocello glued up and ready for the next step. The next few weeks will be carving soundboards and backs. The sides are Australian backwood, the neckblocks from some old mahogany, the tailblocks laminated from spruce with spruce corner blocks, with laminated Australian kauri linings. The 'cello linings have been reenforced with epoxy/carbon fiber composoite to make the rim as rigid as possible
http://www.mcdonaldstrings.com
The Mandolin Project on building mandolins
The Mandolin-a history
The Ukulele on building ukuleles
It looks like you have a lot of carving ahead of you!
Bob Schmidt
Keith.Rogers: about those plastic rings… it seems that they would only be decorative and not actually serve a function like actual ferrules that would line the post holes. Either leave them off altogether or else glue some other donut shaped thingers.
Jim
My Stream on Soundcloud
19th Century Tunes
Playing lately:
1924 Gibson A4 - 2018 Campanella A-5 - 2007 Brentrup A4C - 1915 Frank Merwin Ashley violin - Huss & Dalton DS - 1923 Gibson A2 black snakehead - '83 Flatiron A5-2 - 1939 Gibson L-00 - 1936 Epiphone Deluxe - 1928 Gibson L-5 - ca. 1890s Fairbanks Senator Banjo - ca. 1923 Vega Style M tenor banjo - ca. 1920 Weymann Style 25 Mandolin-Banjo - National RM-1
http://www.mcdonaldstrings.com
The Mandolin Project on building mandolins
The Mandolin-a history
The Ukulele on building ukuleles
No mandolin content this week:
Laying out the details for a new giant 7/8+ gamba shaped bass with a 30" lower bout from spruce cut and air dried since 1904! Part of one of my new quartets....
Oh, snap - that looks like persimmon for the fingerboard. Can't wait to see it finished!
Clark Beavans
Lovely instrument, David. I assume it is using nylon strings with that fiddle scfroll and tuners?
I'm playing all the right notes, but not necessarily in the right order. - Eric Morecambe
http://www.youtube.com/user/TheOldBores
Pretty! Well done.
Is that a black cherry center stripe in the neck and heel? Or something else?
I lived in North Carolina for several years. I found the diversity of tree species in the Southern Appalachians to be amazing!
Your and Graham's local-wood quartets are inspiring. Can't wait to see how each develops.
!!!
Seems a little big for a bench mounted bandsaw. Is that padauk dust?
Not all the clams are at the beach
Arrow Manouche
Arrow Jazzbo
Arrow G
Clark 2 point
Gibson F5L
Gibson A-4
Ratliff CountryBoy A
Bookmarks