A very rare beast ... but is there anybody here who would have an idea of what gauges of strings to use on a plectrum.
Thanks for any help,
Ryk
A very rare beast ... but is there anybody here who would have an idea of what gauges of strings to use on a plectrum.
Thanks for any help,
Ryk
mandolin ~ guitar ~ banjo
"I'm convinced that playing well is not so much a technique as it is a decision. It's a commitment to do the work, strive for concentration, get strategic about advancing by steps, and push patiently forward toward the goal." Dan Crary
What scale length is the instrument, and which tuning do you want to play in? Also, it's helpful to know what instrument it is, and what music you intend to play.
Answer that lot and I can help.
Nigel
The Session King tenor guitar
Nigel,
Scale just about 27"
Tuning CGBD
National Plectrum
Mostly early jazz and popular music from the early 20th century.
Thanks for your help,
Ryk
mandolin ~ guitar ~ banjo
"I'm convinced that playing well is not so much a technique as it is a decision. It's a commitment to do the work, strive for concentration, get strategic about advancing by steps, and push patiently forward toward the goal." Dan Crary
I don't know the answer, but here is how I'd work it out.
That scale is about 1 fret longer than a "standard" guitar, maybe a little more. So at playing tension, the top four strings of a guitar set would ring out at C#, F#, A#/Bb, D#. That's pretty close.
So I'd buy a cheap set of 6-string guitar strings, put the top 4 strings on, tune to CGBD and then see how it felt. Adjust by going up or down one size depending if you want more or less tension in that string.
I'd guess you'd want a heavier top (D) string, but the others might turn out to be about right. Or perhaps the top string will be right and all the others need to go up a size. Have fun finding out!
Well, I'd go for 80/20 bronze wound to take a bit of the edge off.
Gauges - from the treble down - Daddario
PL012 D
PL015 B
BW020 G
BW030 C
Nigel
Tenor guitar
Hi Ryk,
I just joined because I saw your post. I don't come across many plectrum guitar players. Nice to know you are out there. i play a plectrum guitar and banjo and play the same type of music you do. I have an old Martin with a 27" scale and have played Vega Plectrum banjos with the same scale. I generally use 30, 24, 14, 12, as string gauges and favor phosphor bronze on the wounds, but that, I think is a matter of taste and instrument. You are fortunate to have a National plectrum, I have only seen a few and never gotten to play one. My banjo and the Martin I tune CGBD which is usual but the Plectrum guitar I always play is an EMI and I am able to tune it AEF#B which puts it in A instead of C and gives it a lot more bottom to its sound. I'll bet that would work well on your National, but you have to use heaver strings like the middle four strings of a guitar. I use 42,32,25,16 with the 3 lowest strings wound.
Regards
Bill
Ryk, I envy you
I use 026, 018, 014, 011 on my Vega plectrum banjo. Maybe a guitar could use heavier strings, so I'd second Bills gauges.
Mandolins: 1920s (?) Meinel & Herold Bowlback, 2006 Furch "Redwood MA-1" A5
Octaves: 2004 Fender FMO-66 Flat-Top, 2015 A. Karperien 5 String Electric
Banjos: 2007 Gold Tone IT-250F Irish Tenor, 1963 Vega Vox No. 1 Plectrum, 2016 Recording King RK-OT25 Clawhammer
Can you tell me if the string gauges that are discussed here apply equally to a Plectrum guitar, Plectrum archtop guitar and Plectrum banjo? Thanks.
I don't understand what you mean by Plectrum guitar, Plectrum archtop guitar.
I've only had my Martin a short time so haven't played around with gauges. So far I've been happy with the light set below, taken from rycooder.nl which are for a short 26" plectrum. Martins are 27".
030 020 014 011 Light
032 022 014 012 Medium
042 027 018 016 Heavy
I'm an old Your Fathers Mustache banjoist and I love playing my Vega Advanced C-66 plectrum guitar. It's an archtop and has a 27" scale with a big 17" body. Deeper tone than any 4-string guitar I've ever played. I use 30-20-15-12 steel strings by D'Addario, the same gauges I put on my B&D Silver Bell #2 banjo. I love hearing that low C ring out when I'm playing lead, so I usually "pedal" it [leave it open] when on a C or F chord no matter how high up the neck I'm playing...it really fattens up the tone. Enjoy your plectrum!
Wow...it is really beautiful. Thanks for sharing. I use 29, 20, 15, 13 on my plectrum guitar. I use the D'Addario Nickel Bronze for the wound 29/30, and GHS steel for the 15/13.
Also, I would be interested in a used hollow-body if one became available.
Best,
Mitchell
Hi Andy: Your gauge list looks right to me except for "Heavy." I think a big 042 fourth string pulled up to C would put too much tension on the neck...be careful! BTW, I wish all us plectrum guitarists lived close together. I'd love to hear a plectrum+tenor orchestra. Also, do any of you guys ever play electrified [with a pickup on your instrument]? I put an old Harmony pickup in a custom pickguard on my Vega archtop and I love it. A few years ago I found a mint Fender Jazz King amp on consignment for an unusually low price at a Nashville vintage instrument dealer and it's a great match. Keep on pickin!
Hi JLMyers- I use a pickup on most of my guitars and enjoy the sound. I have not used a pickup on the banjo...it is loud enough.
Hi there: Yes, a tone ring equipped banjo is loud enough to cut through almost any other instrument for sure. To me, there is nothing more clear and powerful than a Silver Bell. Yet they can be played softly and expressively...great dynamic range. I love my 1925 #2 plectrum. The craftsmanship is incomparable. 98 years old and it looks like new and plays perfectly. These days, I play the Vega more frequently, but I'd never part with my B&D either!
Bookmarks