Results 1 to 9 of 9

Thread: bridge question?

  1. #1
    Registered User northfolk's Avatar
    Join Date
    Sep 2007
    Location
    Lake Superior, WI
    Posts
    341

    Default bridge question?

    I have a 1922 Gibson A2 with an original patent stamped standard (gapped) bridge. The bridge is tipping forward and has a small crack in it. I am thinking about replacing it with a new Cumberland Acoustic bridge. I am looking for opinions/suggestions about whether to go with a standard base or a full contact base? Thanks.
    Thanks for your support?

  2. #2
    coprolite mandroid's Avatar
    Join Date
    Oct 2002
    Location
    Outer Spiral Arm, of Galaxy, NW Oregon.
    Posts
    17,096

    Default Re: bridge question?

    Original parts still .

    On either side of A2, I have an 'A' with a full contact bridge (top piece, aluminum).
    And an A4 with a 2 footed bridge, all ebony .

    So.. you pick , your choice ..
    writing about music
    is like dancing,
    about architecture

  3. #3
    Registered User William Smith's Avatar
    Join Date
    Jun 2010
    Location
    Sugar Grove,PA
    Posts
    3,364
    Blog Entries
    1

    Default Re: bridge question?

    I fit a full contact to all my keepers! I had a very old Gibson once and at the feet there were indentations-well after I fit a full contact the divots/little dents went bye, bye?

  4. #4

    Default Re: bridge question?

    My 1916 F-4 is fitted with a 2 foot Loar type bridge w/ pat. date and it sounds really good although I have not compared to a full contact bridge. I can't imagine this mandolin sounding any better. YMMV

    Len B.
    Clearwater, FL

  5. #5
    Adrian Minarovic
    Join Date
    Oct 2003
    Location
    Banska Bystrica, Slovakia, Europe
    Posts
    3,452

    Default Re: bridge question?

    I made my first full contact bridge in 1996 and few my mandolins later all my new bridges were full contact. I've seen my share of mandolins with hump between the bridge feet either from floppy bridge material, thin top or from bad fitting. Good and well fitted full contact bridge puts even pressure all across the top and can even counteract some older deformation (that was my reason for making the first one). I haven't noticed any sound difference from two footed bridge when I swapped them.
    Adrian

  6. #6
    Registered User Vernon Hughes's Avatar
    Join Date
    Dec 2006
    Location
    Timberville,Va
    Posts
    849

    Default Re: bridge question?

    Full contact Cumberland on my '22 A-2. It's a beast now.
    Hughes F-5 #1
    Hughes A model #1
    1922 Gibson A-2
    1958 Gibson A-5

  7. #7
    Ursus Mandolinus Fretbear's Avatar
    Join Date
    Sep 2002
    Location
    Copperhead Road
    Posts
    3,134

    Default Re: bridge question?

    Not everyone will agree, but I think full contact bridges make any mandolin sound great, and they never create that "humping" issue in the space between the feet (as there isn't one) Jerry Rosa (Rosa String Works) likes to file the sharp edges off of any foot that touches the top to prevent it from making an impression into the finish.
    But Amsterdam was always good for grieving
    And London never fails to leave me blue
    And Paris never was my kinda town
    So I walked around with the Ft. Worth Blues

  8. #8
    Registered User j. condino's Avatar
    Join Date
    Nov 2005
    Location
    Asheville, NC
    Posts
    2,754

    Default Re: bridge question?

    You can always start with a full contact bridge & modify it to a "two footer" later if you don't like it; 'easier to take away wood than add it...
    www.condino.com

    Crafted by hand in a workshop powered by the sun.

  9. The following members say thank you to j. condino for this post:


  10. #9

    Default Re: bridge question?

    My Northfield Big Mon has about 15mm wide x 1.5 mm high space under the base and it is as close as you'll get to full contact . The mandolin couldn't sound better. I would recommend that.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •