Page 2 of 2 FirstFirst 12
Results 26 to 28 of 28

Thread: Epoxy pore fill and sunburst

  1. #26
    Registered User bpatrick's Avatar
    Join Date
    Jan 2017
    Location
    Conway, Arkansas
    Posts
    65

    Default Re: Epoxy pore fill and sunburst

    Andrew: I saw a photo of your guitars prior to epoxy filling. What type of masking material did you use; the frisket film? If so, the extra tack?
    Bryan Patrick

  2. #27
    Registered User amowry's Avatar
    Join Date
    May 2004
    Location
    Bend, OR
    Posts
    2,084

    Default Re: Epoxy pore fill and sunburst

    Yep, I use the Grafix matte extra tack frisket, which is 0.001" thick. It's amazing stuff, and worked great for that purpose. I score around it with an exacto after the finish is all buffed out, and it peels right off, epoxy and all. To prevent get a bump at the edge it's best to just apply the epoxy over the whole bridge area, pretending it's not there.

  3. The following members say thank you to amowry for this post:


  4. #28
    Registered User bpatrick's Avatar
    Join Date
    Jan 2017
    Location
    Conway, Arkansas
    Posts
    65

    Default Re: Epoxy pore fill and sunburst

    I'll give the Grafix frisket a go. Frisket - makes me think of brisket. Brisket would probably be a bit too greasy.

    Thanks!
    Last edited by bpatrick; Nov-16-2020 at 6:48pm. Reason: An attempt at humor
    Bryan Patrick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •