Re: spinning tuner button
If it's rounded, you should be able to just pull it off but that might not be necessary. If you drip some thin superglue(cyano arylate) down the hole, it will wick into every space between the button and the axle. Keep putting a drop at a time until it doesn't disappear any longer, then leave horisontal for 24 hours. Any surplus can be dried of instantly, dried surplus can be cut of with an exacto knife.
Kentucky KM-805..........2 Hora M1086 Portuguese II(1 in car)
Hora M1088 Mandola.....
Richmond RMA-110..... .Noname Bearclaw
Pochette Franz Janisch...5 Pocket............Alfredo Privitera pocket
Puglisi Pocket 1908........Puglisi 1912.......Puglisi 1917
3 Mandolinetto ..............C.Garozzo
1 Mandriola...................Cannelo G. Mandriola...Böhm Waldzither 1921
Johs Møller 1945............Luigi Embergher Studio 1933
Marma Seashell back......Luigi Embergher 5bis 1909
Bookmarks