-
Pickguard connector for KM-150 or KM-140--What does it look like?
If you have access to a Kentucky KM 150 (or probably 140) you can likely answer this question in ten seconds. Longer than it takes to read this!
I was lucky enough to score (for a graduation gift for someone else) a Kentucky KM-150 on ebay for about $215 with shipping and tax. It was in VG condition--not perfect but okay--partly disassembled, but the only thing missing was the tailpiece cover and I easily found a new after-market one that only require a little bit of "pinching" to fit just fine. (They are not hard to find.)
I have, however, spent hours and hours and hours trying to attach the pickguard. I know it's not necessary, but it is a gift so I'd rather give it intact. The problem is the part of the attachment that supports the part of the pickguard over the mandolin. It is a U-shaped, chrome plated steel piece. You can see it if you look here
https://www.amazon.com/Silver-Pickgu.../dp/B00G9NQ1RI
or do a Google search for
Chrome Plt Scratch Plate Pickguard Mounting Bracket Screw for Mandolin
The side piece is attached well to the side of the mandolin. The long screw fits through the hole on the top of the side piece on the side of the mandolin. (I've inserted it both ways -- the shorter threaded side goes closest to the edge.) The other end of the screw goes through two holes in the side of the U-shaped support bracket in only one direction, and the top of the U-shaped support bracket has a hole in the top so that the pickguard can be screwed into it. On paper this seems to be a good solution. (Describing in words makes it sound more complicated than it is. Again, you can refer to the picture.)
The problem, and it is a big problem, is that when everything is aligned---the U-shaped support bracket does not sit evenly on the mandolin top. Part of it hangs over the F-hole. Part of it doesn't make contact, and it raised the pickguard too high. I've tried making all kinds of adjustments, turning it in the other direction, etc. but when the top of the pickguard is aligned with its proper hole, and the edge of the screw is aligned with the side of the mandolin, and the screw that goes through the pickguard to the bracket are all in place -- the bottom of the support bracket does not align and the top of the pickguard sticks up too high.
I thought maybe this isn't the correct attachment set up for this model of mandolin? Someone really could answer that question in ten seconds--I can't find one nearby to compare. I suppose I could just buy a new, different type for $20 since, if I pay myself even $15/hour, I've probably put $75 worth of labor-hours into this on thing -- but then again, a new one in a slightly different style might not fit either.
SOOOOOO -- first question (the easy question):
Is this the correct set up, especially the U-shaped bracket, for a Kentucky KM-150 mandolin? Is it possibly NOT the set up that the KM-150 comes with? (I drove to a music store a half hour away to look under the pickguard to compare but they were "out of mandolins.")
Second question: If this is the correct equipment, is it supposed to be uneven on the mandolin, partly hanging over the edge of the F-hole? Is the straight side of the pickguard supposed to sit so high off the top?
If you have access to a Kentucky KM 150 (or probably 140) you can likely answer this question in ten seconds....and when I do attach it properly, I can finally give this to the "lucky" recipient!
Thanks,
Alan Spector
================================================== =
1917 Gibson A 1 (WONDERFUL SOUND...really...)
2012 Loar v-400 mando
Octaphone `
Gibson Trapdoor Mandolin Banjo (OUCH!)
Older Blueridge BR-OS Dread.
Great old lam top 1970 Epiphone 000 size
50 year old Yamaha 12 string guitar
Taylor solid spruce/mahogany 000-size
LOAR L0-16 Guitar
100 year old British Zither Banjo
5-string banjo, Old Vega pot, 1963 at Folklore Center, NYC
Older calfskin head 5 string Banjo
Beautiful, pro 40 year old MINT Imperial 5 string-great sound (for a banjo)but SO heavy
Short scale piccolo banjo
Short scale Irish-type tenor banjo
Another tenor needs a just a little fixing
Old Resotone Harmony Tenor Banjo
Fancy "Mother of Toilet Seat" tenor banjo
(I don't even play tenor banjo...)
Various banjo-ukes needing fixing
Ibanez semi-hollow body Electric
Old Autoharp
A uke in new condition
Limberjack (they're great!)
Calfskin head violin from Cambodia
Calfskin head violin from Morocco
African Drums, Kazoos, Harmonicas
AND
a frustrated wife who says: "You only have two hands. How many instruments do you need?"
(Well, an F-hole Flatiron would be nice. Also a Martin 000-28....)
-
-
Registered User
-
-
Re: Pickguard connector for KM-150 or KM-140--What does it look l
.......a frustrated wife who says: "You only have two hands. How many instruments do you need?"
The quote i have always liked is "Be aware of the carpenter with only one hammer. He likely knows how to use it."
-
The Following 2 Users Say Thank You to ajh For This Useful Post:
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks