Results 1 to 24 of 24

Thread: Anyone else have a Deneve?

  1. #1

    Smile Anyone else have a Deneve?

    I'm wondering if anyone else here has a Deneve Mando!
    I have a 1977 #6. These were built by Richard Deneve back in the 70s and 80s. Dick is a Luthier in the Syracuse,N.Y.(Penneville) area and is a Builder of superb Resophonic Guitars(Dobros) and also Flattop Acoustic Guitars. He doesn't build Mandolins anymore(wish he would).
    Dick had a unique way of building Mandolins where the Neck and Neck block was one piece,no joint.And also he was one of the first to use Radius Fretboards on Mandolins.He may have been the inovater of this style Fretboard.
    My Deneve Mando is slightly larger than a typical F model, almost between Mandolin and Mandola.It's just a little too large to fit in a regular F model case.
    I believe the Top is Engleman Spruce with wide grain,around 9 or 10 grains per inch.The Neck is Walnut and Back and Sides are Maple.
    The Neck has a steeper angle than normal and is bigger than normal and longer with wider frets.
    It has a throaty,woody voice which is due to the steeper Neck angle causing more pressure on the Top and the bigger Body.
    I've played this Mandolin alot back in the 80s and 90s and have almost worn a hole through the top from finger wear by the Fretboard extension.
    I used it on recordings,one of which it is on with Dan Tyminski and his Brother Stan(Green Mtn. Bluegrass) when I played with them back in the early 80s and also on a couple of my Family Band(Chilson Hill Gang) recordings.If anyone would like a copy of one of these,let me know.
    I don't use the Deneve much anymore and leave the Strings down with fear of a Top cave-in from so much pressure,which has started to show.So I only get it out for special occasions.
    I met Bill Monroe back in 92, backstage at the Peaceful Valley B-grass Fest. and let him play it,he liked it.Gave it a good look over,chopped a few chords and said "Here's a song I wrote" and commenced playing it.Can't remember the name of it,something with a Indian name. He then handed it back to me and said "That's a good Mandlin son".I shook his Hand and said Thank You Mr.Monroe. I didn't wash my Hand or change the Strings for a Year after that day!
    So if anyone out there has a Deneve Mandolin,I'd love to hear from you! Jim
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	me an Bill.jpg 
Views:	619 
Size:	112.6 KB 
ID:	39845  

  2. #2

    Default Re: Anyone else have a Deneve?

    I also want to mention that I am in no way trying to sell or solicate when I mentioned copys of recordings,these are free,just help me out with shipping. That's all. Jim

  3. #3

    Default Re: Anyone else have a Deneve?

    Hi Jim,

    That's a good Monroe story!

    I met Dick Deneve a few months ago at an event here in Nashville called ResoSummit. We were in quite a few classes together. Yes, he is now pretty involved in making resophonic guitars. I had no idea he had built some mandolins. If he was lucky enough (like me!) to be included in the next ResoSummit, I will certainly ask him about it.

    From what I can see in the picture, Dick is still using the same, or a similar inlay on his pegheads.

  4. #4
    Mando accumulator allenhopkins's Avatar
    Join Date
    Mar 2006
    Location
    Rochester NY 14610
    Posts
    17,378

    Default Re: Anyone else have a Deneve?

    The late Dean Roets of Bristol Mountain Bluegrass (first incarnation thereof) used to play a DeNeve mandolin -- we're talking 30 years ago or so. I played it once and couldn't fathom how anyone could handle an instrument with such an extremely raked-back neck, high bridge, and great distance between the strings and the top. Dean got great sound out of it -- it was really loud -- and considered it an improvement over the A-2 he'd played before. It surely competed well with banjo and fiddle in the BMB blend. DeNeve has garnered quite a rep for his resonator guitars, and I guess is pretty much a "Dobro" specialist now.
    Allen Hopkins
    Gibsn: '54 F5 3pt F2 A-N Custm K1 m'cello
    Natl Triolian Dobro mando
    Victoria b-back Merrill alumnm b-back
    H-O mandolinetto
    Stradolin Vega banjolin
    Sobell'dola Washburn b-back'dola
    Eastmn: 615'dola 805 m'cello
    Flatiron 3K OM

  5. #5

    Default Re: Anyone else have a Deneve?

    Glad to hear Dick finally saw the light and turned from mandos to dobros......my mesquite body/curly maple top RD dobro is the loudest hubcap west of the Rio Grande, and east of the Rio Mimbres!

  6. #6

    Default Re: Anyone else have a Deneve?

    Quote Originally Posted by Steevarino View Post
    Hi Jim,

    That's a good Monroe story!

    I met Dick Deneve a few months ago at an event here in Nashville called ResoSummit. We were in quite a few classes together. Yes, he is now pretty involved in making resophonic guitars. I had no idea he had built some mandolins. If he was lucky enough (like me!) to be included in the next ResoSummit, I will certainly ask him about it.

    From what I can see in the picture, Dick is still using the same, or a similar inlay on his pegheads.
    Hi Steve,
    I've heard alot about you!
    I'm glad you met Dick, he's a super Guy isn't he? When you see him again tell him Jim Bevins said Hi! That'll surprise him coming from you.
    Yes, the inlay with the backwards R.
    Dick and Loretta have been a long time Friends to my Family.
    He Built my Mando,built my Dad 2 Guitars,built my Sisters 5-String and has built my Brother Dave 3 Resos. So we all kept him busy.

  7. #7

    Default Re: Anyone else have a Deneve?

    Quote Originally Posted by allenhopkins View Post
    The late Dean Roets of Bristol Mountain Bluegrass (first incarnation thereof) used to play a DeNeve mandolin -- we're talking 30 years ago or so. I played it once and couldn't fathom how anyone could handle an instrument with such an extremely raked-back neck, high bridge, and great distance between the strings and the top. Dean got great sound out of it -- it was really loud -- and considered it an improvement over the A-2 he'd played before. It surely competed well with banjo and fiddle in the BMB blend. DeNeve has garnered quite a rep for his resonator guitars, and I guess is pretty much a "Dobro" specialist now.
    Yes Allen,I think I remember Dean and I think I played his Deneve one time and that was probably 30 or so years ago and it had a close resemblance to mine.

  8. The following members say thank you to eight8strgs for this post:


  9. #8

    Default Re: Anyone else have a Deneve?

    Quote Originally Posted by oldwave maker View Post
    Glad to hear Dick finally saw the light and turned from mandos to dobros......my mesquite body/curly maple top RD dobro is the loudest hubcap west of the Rio Grande, and east of the Rio Mimbres!
    Yup, They are LOUD. I think the Deneve my Brother Dave is using these days is the loudest, east of the Rios anyways!
    This one is a pretty Blue! He also has a 7 string and one other 6 string,all RDs and he won't use anything else.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Dave Bevins and Deneve Reso.jpg 
Views:	300 
Size:	133.6 KB 
ID:	39865  

  10. #9

    Default Re: Anyone else have a Deneve?

    UH,OH!
    I hope we ain't breakin' any by-laws by starting a Reso Cafe here!

  11. #10

    Default Re: Anyone else have a Deneve?

    Here's a Picture of my Dad with his Redwood Top RD.Dad passed away in 06. Great Guitar picker and Singer he was.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Dusty.jpg 
Views:	259 
Size:	31.2 KB 
ID:	39893  

  12. #11
    Mando-Accumulator Jim Garber's Avatar
    Join Date
    Mar 2003
    Location
    Westchester, NY
    Posts
    30,736

    Default Re: Anyone else have a Deneve?

    Quote Originally Posted by eight8strgs View Post
    And also he was one of the first to use Radius Fretboards on Mandolins.He may have been the inovater of this style Fretboard.
    Just to set the historic record straight (but not to demean Mr. Deneve's contribution): radius fretbioards on mandolins predate around 1900 at least. The Roman style of bowlback such as those made by Luigi Embergher used them back then I believe influenced by the same on violins. Maybe Mr. Deneve revived that in contemporary instruments tho I think other makers such as John Monteleone might have had the same ideas at the same time.
    Jim

    My Stream on Soundcloud
    Facebook
    19th Century Tunes
    Playing lately:
    1924 Gibson A4 - 2018 Campanella A-5 - 2007 Brentrup A4C - 1915 Frank Merwin Ashley violin - Huss & Dalton DS - 1923 Gibson A2 black snakehead - '83 Flatiron A5-2 - 1939 Gibson L-00 - 1936 Epiphone Deluxe - 1928 Gibson L-5 - ca. 1890s Fairbanks Senator Banjo - ca. 1923 Vega Style M tenor banjo - ca. 1920 Weymann Style 25 Mandolin-Banjo - National RM-1

  13. #12

    Default Re: Anyone else have a Deneve?

    Quote Originally Posted by Jim Garber View Post
    Just to set the historic record straight (but not to demean Mr. Deneve's contribution): radius fretbioards on mandolins predate around 1900 at least. The Roman style of bowlback such as those made by Luigi Embergher used them back then I believe influenced by the same on violins. Maybe Mr. Deneve revived that in contemporary instruments tho I think other makers such as John Monteleone might have had the same ideas at the same time.
    Okay, Thanks Jim!
    Dick may have told me he was one of the first to start using it on contemporary instruments.

  14. #13

    Default Re: Anyone else have a Deneve?

    Hi Jim,

    I have a DeNeve mandolin, #27 from the 1998 batch, which I think was the last group of mandolins Dick made. When I bought my first dobro from Dick in 1984, I saw the parts for a batch of mandolins hanging in the shop and asked him to put me on his mandolin list. It took him 14 years to finish that batch, so I knew the wood was well seasoned. Dick is a wonderful person and maker of fine instruments. As others have commented, he's best known for his dobros, and I can attest to their quality, having played them for 25 years. I also like the DeNeve mandolin very much. It's loud and easy to play. In 11 years, the only thing I've done is replace the bridge with a new Steve Smith bridge when the original bridge broke. I also remember Dean Roets. I used to jam with him every year at the Laing Brothers festival and Peaceful Valley starting in the mid-80s. He was a fine player and he really made that DeNeve mandolin sing.

    Andy

  15. #14

    Default Re: Anyone else have a Deneve?

    Quote Originally Posted by Andy B View Post
    Hi Jim,

    I have a DeNeve mandolin, #27 from the 1998 batch, which I think was the last group of mandolins Dick made. When I bought my first dobro from Dick in 1984, I saw the parts for a batch of mandolins hanging in the shop and asked him to put me on his mandolin list. It took him 14 years to finish that batch, so I knew the wood was well seasoned. Dick is a wonderful person and maker of fine instruments. As others have commented, he's best known for his dobros, and I can attest to their quality, having played them for 25 years. I also like the DeNeve mandolin very much. It's loud and easy to play. In 11 years, the only thing I've done is replace the bridge with a new Steve Smith bridge when the original bridge broke. I also remember Dean Roets. I used to jam with him every year at the Laing Brothers festival and Peaceful Valley starting in the mid-80s. He was a fine player and he really made that DeNeve mandolin sing.

    Andy
    Hi Andy, Will you be going to the Brandon Vt. Festival(Basin Bluegrass Festival)? If so, maybe we could meet up and talk Deneves. Dick usually goes there too.
    http://www.brandon.org/bluegrass.htm

  16. #15
    Registered User
    Join Date
    Nov 2012
    Location
    Dade City, Florida
    Posts
    3

    Default Re: Anyone else have a Deneve?

    I know this is an old thread but I just picked up #27's brother. It is a DeNeve 1998 #29. It is my first American made mandolin and I am proud to have it. Any more DeNeves around?

  17. #16

    Default Re: Anyone else have a Deneve?

    Welcome to the ranks of the Deneve mandolin owners. I saw the ad for #29. That was a good price, and it looks very nice. I hope you enjoy it a lot.

  18. #17
    Registered User
    Join Date
    Nov 2012
    Location
    Dade City, Florida
    Posts
    3

    Default Re: Anyone else have a Deneve?

    Thanks. She has a loud and solid tone with lots of sustain. There is a nice woody smoothness to the tone. I think she chops better than anything i have played so far. The intonation and fret spacing is spot on and this is the first mandolin I have seen with a zero fret. I know it used to be very common years back but not lately. My family and I are putting together a Christmas cd and I have already put her to work.

  19. #18
    Registered User Andy Alexander's Avatar
    Join Date
    Nov 2008
    Location
    Lodi NY
    Posts
    296

    Default Re: Anyone else have a Deneve?

    Perry Cleveland of Rochester/Waterloo NY used to play one of Dick's mandolins. The instrument was a larger scale than a standard mandolin. Dick's Resonator Guitars have gained an excellent reputation.

  20. #19
    Mando accumulator allenhopkins's Avatar
    Join Date
    Mar 2006
    Location
    Rochester NY 14610
    Posts
    17,378

    Default Re: Anyone else have a Deneve?

    Bought a used DeNeve resonator guitar about 18 months ago; bird's-eye maple top, Brazilian rosewood back and sides, a really nice instrument.

    Perry's playing a Unicorn two-point mandolin now, I believe.
    Allen Hopkins
    Gibsn: '54 F5 3pt F2 A-N Custm K1 m'cello
    Natl Triolian Dobro mando
    Victoria b-back Merrill alumnm b-back
    H-O mandolinetto
    Stradolin Vega banjolin
    Sobell'dola Washburn b-back'dola
    Eastmn: 615'dola 805 m'cello
    Flatiron 3K OM

  21. #20
    MandoHog MandoHog's Avatar
    Join Date
    Nov 2007
    Location
    Conway/Little Rock Arkansas
    Posts
    95

    Default Re: Anyone else have a Deneve?

    .....Perry's playing a Unicorn two-point mandolin now, I believe..... ???

    Unicorn "two-point"? A Dave Sinko built? I would like to see some pictures if ever available.

  22. #21
    Mando accumulator allenhopkins's Avatar
    Join Date
    Mar 2006
    Location
    Rochester NY 14610
    Posts
    17,378

    Default Re: Anyone else have a Deneve?

    Well, I may be wrong...damn, I did a gig with Perry tonight and didn't scope out his instrument. He had to leave early 'cause he banged up his leg slipping in the bathtub.

    Anyway, decent pic of the mando at the end of this vid:

    Allen Hopkins
    Gibsn: '54 F5 3pt F2 A-N Custm K1 m'cello
    Natl Triolian Dobro mando
    Victoria b-back Merrill alumnm b-back
    H-O mandolinetto
    Stradolin Vega banjolin
    Sobell'dola Washburn b-back'dola
    Eastmn: 615'dola 805 m'cello
    Flatiron 3K OM

  23. #22
    MandoHog MandoHog's Avatar
    Join Date
    Nov 2007
    Location
    Conway/Little Rock Arkansas
    Posts
    95

    Default Re: Anyone else have a Deneve?

    Oh yes! Of course. The Unicorn Commemorative model. http://www.phoenixmandolins.com/unicorn.htm
    I just could not picture that until I saw the video. Thanks Allen

  24. The following members say thank you to MandoHog for this post:


  25. #23

    Default Re: Anyone else have a Deneve?

    I acquired #26 today! Looking forward to giving it a run. It looks as if it’s never been played.

  26. #24

    Default Re: Anyone else have a Deneve?

    Dick built a good sounding mandolin. I hope you get a lot of enjoyment out of it.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •