Results 1 to 11 of 11

Thread: One of those days - string changing woes

  1. #1
    Registered User Eric Platt's Avatar
    Join Date
    Jan 2009
    Location
    St. Paul, MN
    Posts
    2,039

    Default One of those days - string changing woes

    On Wednesday decided to put some flatwounds on the Strad O Lin. Simple enough, right?

    Took the clamshell off without using tools. Jammed one of the tailpiece tines between the nail and finger on the right. Owie! Thankfully bleeding stopped quickly.

    Okay, then starting swapping strings. Oh, and the G and A start slipping. As the D'Addario don't have silk wraps, there is nothing to grip the soundpost. So have to do an over/under wrap to lock the string. Did I mention this SOL has very short tuner posts? It does. Like really short. Like one wrap above the post hole is at the very top of the post.

    Finally get that done. Then start on the A and E strings. No problem until the last E string. Pops out of the tailpiece tine a couple of times. No biggie. But by the time it's done a second time, the string has now been kinked near the tuner post. What? How did that happen? Seriously. Sigh. And I couldn't undo it. On top of it, it would be below the post so the string would break from the stress. Okay, to the spares and get another E.

    Sigh. So instead of something that should have taken about 20 minutes, wound up taking an hour.

    Just frustrating. And for those who want to say wrap around the post first then through the hole, nope. Not with flatwounds on this instrument. They will not hold the free end of the string enough to keep from slipping. Tried it. And If you can get it tightly wrapped above and below the hole before sending the string through, you're better at it than I am. It could be done. Just would take me too much time. (Not that this didn't).
    Brentrup Model 23, Boeh A5 #37, Gibson A Jr., Big Muddy M-11, Coombe Classical flattop, Strad-O-Lin
    https://www.facebook.com/LauluAika/
    https://www.lauluaika.com/
    https://www.facebook.com/Longtine-Am...14404553312723

  2. #2
    Gummy Bears and Scotch BrianWilliam's Avatar
    Join Date
    Sep 2009
    Location
    Summit County Colorado
    Posts
    1,302

    Default Re: One of those days - string changing woes

    Good luck to you on the rest of your Saturday

  3. The following members say thank you to BrianWilliam for this post:


  4. #3
    Registered User Tom Wright's Avatar
    Join Date
    Jun 2010
    Location
    Rockville, MD
    Posts
    1,916
    Blog Entries
    7

    Default Re: One of those days - string changing woes

    A sharp bend on both sides of the peg should prevent slippage. I never have to do above/below.
    I attach the string to tailpiece first, insert through peg with some slack (1-1.5") bend both sides, begin turning peg as I hold string down to ensure clean wrap. I keep all the wrap (2-3 turns) below the hole.

    Never have slippage on plain strings, or wound. Two bends are essential, and a couple of turns usually needed for reducing the pull at the hole. I like three turns for the plain strings.
    Bandcamp -- https://tomwright1.bandcamp.com/
    Videos--YouTube
    Sound Clips--SoundCloud
    The viola is proof that man is not rational

  5. The following members say thank you to Tom Wright for this post:


  6. #4
    Mandolin user MontanaMatt's Avatar
    Join Date
    Mar 2017
    Location
    Bozeman, MT
    Posts
    1,252

    Default Re: One of those days - string changing woes

    I use the lock back technique, never slips and only really needs one wrap.
    2007 Weber Custom Elite "old wood"
    2017 Ratliff R5 Custom #1148
    Several nice old Fiddles
    2007 Martin 000-15S 12 fret Auditorium-slot head
    Deering Classic Open Back
    Too many microphones

    BridgerCreekBoys.com

  7. The Following 2 Users Say Thank You to MontanaMatt For This Useful Post:


  8. #5
    Registered User Frankie D's Avatar
    Join Date
    Jan 2009
    Location
    So Cal.
    Posts
    92

    Default Re: One of those days - string changing woes

    I'm guessing you can't use the Taylor Method to string a mando with regular (74's)? I never tried it, but wondering.
    Eastman 515 Mando
    Gibson J-30 Guitar
    RK-80 Banjo

  9. The following members say thank you to Frankie D for this post:


  10. #6
    Registered User Eric Platt's Avatar
    Join Date
    Jan 2009
    Location
    St. Paul, MN
    Posts
    2,039

    Default Re: One of those days - string changing woes

    Quote Originally Posted by Frankie D View Post
    I'm guessing you can't use the Taylor Method to string a mando with regular (74's)? I never tried it, but wondering.
    Have used a variation of the Taylor method on both guitar and mandolin since the 1980's.

    Have used the double bend method on plain strings for years. For some reason, this Strad O Lin still is picky with it. Have had more string slippage with these posts than any others I've tried. The very short posts don't help. Think about half the height sticking out than a regular set. Frustrating enough to make me consider swapping out to a modern set to make life easier.

    It was all user error to one degree or another. Everything adding up just made for a frustrating day.

    OTOH, it was worth it. The flatwounds are giving me the sound I wanted to hear from this instrument. At least for now.
    Brentrup Model 23, Boeh A5 #37, Gibson A Jr., Big Muddy M-11, Coombe Classical flattop, Strad-O-Lin
    https://www.facebook.com/LauluAika/
    https://www.lauluaika.com/
    https://www.facebook.com/Longtine-Am...14404553312723

  11. #7
    Registered User jim simpson's Avatar
    Join Date
    Sep 2002
    Location
    Wheeling, WV
    Posts
    5,505

    Default Re: One of those days - string changing woes

    It would be cool if you could find an older working set of tuners with longer posts to replace. I suspect a modern tuner swap may require enlarging the diameter of the holes as well. I don't understand why they would put such short post on, I've run into examples as well.
    Old Hometown, Cabin Fever String Band

  12. #8

    Default Re: One of those days - string changing woes

    My ‘50s Strad-O-Lin has a slight taper to the peghead thickness, but the shortest posts protrude about 3/8” with the holes a bit more than 1/8 from the post tops. These are very plain, squarecut tuners, no bushings, fairly loose holes in the wood, worm-over. I do change strings every two or three decades, not that it has any effect I can hear except for replacing the broken ones. That helps.
    Certainly, if there is wear in the wood, oversized holes, having the string anchor (last turn) as low as possible reduces the leverage that presses the gear into the worm and helps reduce excessive friction, so I see that as a general reason for keeping posts short and winding close to the wood if there are no bushings. Worm under, opposite effect.

  13. The following members say thank you to Richard500 for this post:


  14. #9
    Registered User J Mangio's Avatar
    Join Date
    Feb 2012
    Location
    Willow Spring, NC
    Posts
    563

    Default Re: One of those days - string changing woes

    I use a capo to hold the strings on the tailpiece.
    2021 The Loar LM700 VS

  15. #10
    Registered User Eric Platt's Avatar
    Join Date
    Jan 2009
    Location
    St. Paul, MN
    Posts
    2,039

    Default Re: One of those days - string changing woes

    Quote Originally Posted by Richard500 View Post
    My ‘50s Strad-O-Lin has a slight taper to the peghead thickness, but the shortest posts protrude about 3/8” with the holes a bit more than 1/8 from the post tops. These are very plain, squarecut tuners, no bushings, fairly loose holes in the wood, worm-over. I do change strings every two or three decades, not that it has any effect I can hear except for replacing the broken ones. That helps.
    Certainly, if there is wear in the wood, oversized holes, having the string anchor (last turn) as low as possible reduces the leverage that presses the gear into the worm and helps reduce excessive friction, so I see that as a general reason for keeping posts short and winding close to the wood if there are no bushings. Worm under, opposite effect.
    On this particular one, there is no headstock taper. The shafts are about 3/16" showing above the headstock. For comparison, a vintage set of Waverly tuners have the tuner holes above where these tuners stop. As I've said, very short posts.

    So basically what you have is what I would have if I switched out to vintage Waverly.
    Brentrup Model 23, Boeh A5 #37, Gibson A Jr., Big Muddy M-11, Coombe Classical flattop, Strad-O-Lin
    https://www.facebook.com/LauluAika/
    https://www.lauluaika.com/
    https://www.facebook.com/Longtine-Am...14404553312723

  16. #11
    Mando accumulator allenhopkins's Avatar
    Join Date
    Mar 2006
    Location
    Rochester NY 14610
    Posts
    17,378

    Default Re: One of those days - string changing woes

    Just be glad you weren't restringing an Autoharp.
    Allen Hopkins
    Gibsn: '54 F5 3pt F2 A-N Custm K1 m'cello
    Natl Triolian Dobro mando
    Victoria b-back Merrill alumnm b-back
    H-O mandolinetto
    Stradolin Vega banjolin
    Sobell'dola Washburn b-back'dola
    Eastmn: 615'dola 805 m'cello
    Flatiron 3K OM

  17. The following members say thank you to allenhopkins for this post:


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •