Re: Back removal
There is another option to remove the back with minimal damage. Get a thin NO kerf saw and saw the glue line. Violins use diluted glue for the top and back so they are easier to remove. I have sawed the back off guitars, just go slow and follow line. Thin saw with no kerf is the key. I have read Randy Woods saws off backs to repair mandolins. With no kerf you will lose a minimal amount of material from the sides, less than a half mm. Good luck.
Last edited by pops1; Jun-13-2022 at 1:26pm.
THE WORLD IS A BETTER PLACE JUST FOR YOUR SMILE!
Bookmarks