Re: help with feedback
If you are still using the Radius with the Para-DI it should be ok, impedance-wise, if you take the unbalanced (1/4") output to an amp, but it would be better if you could run a balanced (XLR) signal to the PA, and only use the on-stage amp at a level for monitoring, IMO. I would not be using a guitar amp for that.
And, you do need to roll the bass off a fair amount on everything along the way because, let's face it, there's no bass in a mandolin so anything below 200kHz picked up and amplified is going to be a problem.
2018 Kentucky KM-950, 2017 Ellis A5 Deluxe
Bookmarks