Allen Hopkins
Gibsn: '54 F5 3pt F2 A-N Custm K1 m'cello
Natl Triolian Dobro mando
Victoria b-back Merrill alumnm b-back
H-O mandolinetto
Stradolin Vega banjolin
Sobell'dola Washburn b-back'dola
Eastmn: 615'dola 805 m'cello
Flatiron 3K OM
Jim
My Stream on Soundcloud
19th Century Tunes
Playing lately:
1924 Gibson A4 - 2018 Campanella A-5 - 2007 Brentrup A4C - 1915 Frank Merwin Ashley violin - Huss & Dalton DS - 1923 Gibson A2 black snakehead - '83 Flatiron A5-2 - 1939 Gibson L-00 - 1936 Epiphone Deluxe - 1928 Gibson L-5 - ca. 1890s Fairbanks Senator Banjo - ca. 1923 Vega Style M tenor banjo - ca. 1920 Weymann Style 25 Mandolin-Banjo - National RM-1
I read "Empire of Cotton" last winter.
NMC of course, but a lot of information on the development of spinning technologies, industrialization, slave economies, 18th and 19th industrial and plantation working conditions.
Hair raising, of course.
As expected, more than a few sacred cows are led to the bbq.
Highly recommended.
Mick
Ever tried, ever failed? No matter. Try again, fail again. Fail better.--Samuel Beckett
______________________
'05 Cuisinart Toaster
'93 Chuck Taylor lowtops
'12 Stetson Open Road
'06 Bialetti expresso maker
'14 Irish Linen Ramon Puig
Well thanks everyone for your input. I was able to trade it for a 1946 Gibson LG-2 and a some $$. Which made me quite happy as it went to capable hands, and the work the Gibson needs is well within my skill set. I've already begun its restoration.
Glad you made a good trade. I saw that your NH craigslist post was gone, and was wondering what kind of a deal you'd made.
"To be obsessed with the destination is to remove the focus from where you are." Philip Toshio Sudo, Zen Guitar
Congratulations on the nice LG-2. But dust off your deep throat clamps and brace jacks; the odds are pretty good that you will find at least 2 or 3 loose glue joints inside, maybe more. It comes with the territory with Gibson flat tops from this era. A fellow repairman once quipped that during this period, Gibson had a foreman who "started the day's shift by sprinkling a little glue into the water-pot."
It should be worth it, though-- these are usually quite good instruments once they've been tightened up.
Last edited by rcc56; Aug-05-2022 at 2:35pm.
That sounds like a very good deal. 1940s Gibsons and Martins prices are going quite high these days. I sold a 48 LG2 last year and I see the same guitar is offered for considerably more. To get that guitar and cash you did great.
Jim
My Stream on Soundcloud
19th Century Tunes
Playing lately:
1924 Gibson A4 - 2018 Campanella A-5 - 2007 Brentrup A4C - 1915 Frank Merwin Ashley violin - Huss & Dalton DS - 1923 Gibson A2 black snakehead - '83 Flatiron A5-2 - 1939 Gibson L-00 - 1936 Epiphone Deluxe - 1928 Gibson L-5 - ca. 1890s Fairbanks Senator Banjo - ca. 1923 Vega Style M tenor banjo - ca. 1920 Weymann Style 25 Mandolin-Banjo - National RM-1
I was faced with a similar problem but with a Salsedo; I did get it in playing condition albeit with all the decoration on the neck gone.
I think you will find that there is not a fretboard as such but rather a thin veneer between the frets, in stripping the neck you will end up with a jigsaw of multiple thin bits of wood and decoration. Personally I'd leave well alone and admire it for the fantastic workmanship, fully repaired, at lord knows what cost might leave you with a mandolin that doesn't sound that good anyway.
Now on eBay at $3,500:
https://www.ebay.com/itm/17540586884...emCondition=10
Just finished the work on the LG-2. 15 braces reglued, 9 cracks, neck reset and more. It is a fantastic sounding and playing guitar, I couldn't be more happy with the trade!
The mandolin was beyond my skills, but the guitar was a fun and satisfying challenge to repair. Though one brace took me 6 hours to get right. Always a little detail would require cleanup and starting over. But then I discovered a dollar store kid's super sized pencil eraser that proved to be the perfect brace clamp! Took 5 minutes to get the brace clamped and in position after that. The right tools.. Anyways, hope Indie Music moves the mandolin, they are great guys!
Oh yeah, and certainly Gibson had real trouble with their glue on this guitar. Perhaps in 1946 they were scraping the bottom of the barrel after the war. A few braces had odd grain runout as well. Trying to pump them out for the returning G.I.'s who were sick of war and ready to play!
They are great sounding guitars! This reminded me of a late 40's J-45 I repaired a few years ago. Similar to yours, every inside brace had come loose, but somehow the guitar didn't implode in the process. Many of the braces showed the original glue was used quite sparingly. It was the customer's grandfather's guitar and they wanted it made playable again. The finish was still good, so after a lot of thinking and planning, I decided to repair the braces through the soundhole rather than taking the back off. It was a long, but fun process using a combination of jacks, clamps, and homemade purpose-built cauls and more than a little luck. A bonus was after the bracing was restored, the guitar didn't require a neck reset. So the customer ended up with an original finish guitar that hopefully will be around another 60-70 years.
Thanks for the pencil eraser tip!
Through the hole is the way to go!
Bookmarks