Should be able to. Maguiars, Novus 2, similar, on a soft rag. Expect to spend some time getting the gloss to match.
Or... get some Micromesh and start with 3200 grit or so and work your way toward 12000 grit, stopping when the gloss matches the rest of the finish (probably about 8000 grit or so).
(Here's an example of the difference between an inexpensive F-style mando and a more expensive one. Keep track of your time doing this and figure your hourly rate. Add that to the mandolin price.)
John Hamlett
www.hamlettinstruments.com
About 45 minutes with Maguiar's and a Q-tip got it done.
It's an Eastman MD 615 (and my first and only mandolin) so not cheap but certainly not "upper shelf." I notice that the inside curves of the scroll are even less gloss, some of which I won't even attempt to improve. John, do you somehow get all the surfaces of your builds to the same finish level? That would indeed take scores of hours.
Guitars, yeah pretty much. F-5s? No way. The equipment required to get a top level finish (including hands) will not fit into the nooks and crannies of scrolls, elevated fingerboard extenders and such. Even the usual A-style mando has an elevated extender. The designs prevent excellent finish on all surfaces.
John Hamlett
www.hamlettinstruments.com
That was my thought too. I can improve a little more, but that's it. Now I won't feel like I'm lazy or something!
It’s always easier to make a finish look worse ,than look better.
Bookmarks